Global Techmart
Global Techmart
Gazipur, New Delhi, Delhi
SEND SMS
SEND EMAIL

Loop Calibrator

Our product range includes a wide range of loop calibrator upsiii, intrinsically safe loop calibrator upsiii is, electrical loop calibrator and rtd calibrator.

Loop Calibrator UPSIII

Loop Calibrator UPSIII
  • Loop Calibrator UPSIII
Get Best Quote
Approx. Price: Rs 40,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Display TypeDigital
BrandGE Druck
ModelUPSIII
Power Supply4 x 1.5 V AA-size alkaline batteries (standard) or universal power supply (see option B)
Relative Humidity0% to 90% non-condensing
ConformityEN 61010, /EN 61326-1:1997 + A1:1998, CE marked
Housing MaterialHigh impact ABS
Dimensions3 in x 5 in x 1 in (77 mm x 129 mm x 24 mm) (w x h x d)
Weight9.7 oz (275 g) including batteries
DisplayGraphic LCD, 1.2 in x 2.1 in (31 mm x 54 mm)
Electrical TerminalsGold plated, 4 mm sockets
Battery Life75 hours in read mode, 18 hours at 12 mA
Auto Power Down30 minutes after last key press
Low Battery WarningBattery symbol displayed
Open LoopFlashes "open loop"
Loop Resistance HighFlashes "check loop"
Hart Resistor235 menu selectable loop resistor
Calibration Reference72 deg F (22 deg C) +-2 deg F(+-3.6 deg C)/RH 45% +-15%
Operating Temperature14 deg F to 122 deg F (-10 deg C to 50 deg C)

The UPS-III Loop Calibrator is an loop calibrator. Its size makes it rugged and extremely compact. Measuring 3” x 5” and weighing just 9.7 ounces, it fits comfortably in a shirt pocket. It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy to read display and simple to use time saving features.


Features:
  • Measure or Source 0 to 24 mA
  • Accuracy 0.01% of reading
  • Dual mA and % readout, linear or flow
  • Step, Span Check, Valve Check, Ramp
  • 6 VDC measurement and continuity
  • HART® compatible

tep quickly through linearity tests and zero/span
adjustments. In valve mode, seating can be checked and the
positioner set.
Step Mode0.00%25.00%50.00%75.00%100.00%
4 to 20 mA linear48121620
0 to 20 mA linear05101520
4 to 20 mA flow4581320
0 to 20 mA flow01.25511.2520
4 to 20 mA span check4---20
0 to 20 mA span check0---20
4 to 20 mA valve3,8,4,4,2-12-19,20,21

UPS III Specifications:
FunctionRangeResolution1 Year Accuracy1 % rdg + countsRemarks
Source mA24 mA0.0010.01% + 2V-max 75V
Source mA and 24V24 mA0.0010.01% + 2R-max 1 k Ω
at 20 mA
Measure24 mA0.0010.01% + 2V-max
mA 75V
Measure mA and 24V24 mA0.0010.01% + 2Rmeasure 15 Ω
Measure V50 V0.0010.02% + 4Rmeasure
1 M Ω
Continuity< 100 S

1 mA
Current


      Graphic Display:
      The graphic display with menu-driven interface is easier to
      use than traditional knobs, switches, multi-function keys and
      dual key sequences


        Request
        Callback


        Additional Information:

        • Item Code: UPS-III
        Yes! I am Interested
        View PDF

        Intrinsically Safe Loop Calibrator UPSIII IS

        Intrinsically Safe Loop Calibrator UPSIII IS
        • Intrinsically Safe Loop Calibrator UPSIII IS
        Get Best Quote
        Approx. Price: Rs 90,000 / PieceGet Latest Price

        Product Details:

        Minimum Order Quantity1 Piece
        Power Supply4 x 1.5 V AA-size alkaline batteries (see certificate for type)
        Relative Humidity0% to 90% non-condensing
        Housing MaterialHigh impact ABS
        Dimensions3.5 in x 5.5 in x 1.7 in (90 mm x 140 mm x 42 mm) (w x h x d)
        Weight16.2 oz (460 g) including batteries and leather case
        DisplayGraphic LCD, 1.2 in x 2.1 in (31 mm x 54 mm)
        Electrical TerminalsGold plated, 4 mm sockets
        Battery Life60 hours in measure mode, 14 hours at 12 mA
        Auto Power Down30 minutes after last key press
        Low Battery WarningBattery symbol displayed
        Open LoopFlashes "open loop"
        Loop Resistance HighFlashes "check loop"
        HART Resistor220 menu selectable loop resistor
        Calibration Reference72 deg F (22 deg C) +-9 deg F(+-5 deg C)/RH 45% +-15%
        Operating Temperature14 deg F to 104 deg F (-10 deg C to 40 deg C)

        The UPS-III-IS is an Intrinsically Safe Loop Calibrator, with its size making it rugged and extremely compact. It measures 3.5 in x 5.5 in x 1.7 in (90 mm x 140 mm x 42 mm) and weighs just 16.2 oz (460 g). It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy-to-read display and simple-to-use time saving features.

         

        Features:

        • Adjustable resolution & display contras
        • Uses industry standard AA batteries
        • Battery voltage and battery low indicator
        • Information screen reports serial number, software version and calibration date
        • Primary reading in mA or %
        • Auto power off (enable or disable)
        • Pin protected, closed case calibration
        • Leather case with carry strap
        • ATEX/IEC intrinsically safe
        • Measure or source 0 to 24 mA
        • Accuracy 0.015% of reading
        • Dual mA and % readout, linear or flow
        • Step, span check, valve check, ramp
        • 50 VDC measurement and continuity
        • HART® compatible

        Graphic Display:The graphic display with menu-driven interface is easier to use than traditional knobs, switches, multifunction keys and dual key sequences.

        UPS III IS Specifications:

         

        Step Mode0.00%25.00%50.00%75.00%100.00%
        4 to 20 mA linear48121620
        0 to 20 mA linear05101520
        4 to 20 mA flow4581320
        0 to 20 mA flow01.25511.2520
        4 to 20 mA span check4---20
        0 to 20 mA span check0---20
        4 to 20 mA valve3,8,4,4,2-12-19,20,21

         

        UPS III IS Specifications:

         

        FunctionRangeResolution1 Year Accuracy1 % rdg + countsRemarks
        Source mA24 mA0.0010.015% + 2V-max 30 V
        Source mA and 21V24 mA0.0010.015% + 2R-max 650 S
        at 20 mA
        Measure mA24 mA0.0010.015% + 2V-max 30 V
        Measure mA and 21V24 mA0.0010.015% + 2Rmeasure 15S

           

            Request
            Callback


            Additional Information:

            • Item Code: UPS-III-IS
            Yes! I am Interested
            View PDF

            Electrical Loop Calibrator

            Electrical Loop Calibrator
            • Electrical Loop Calibrator
            Get Best Quote
            Approx. Price: Rs 1 Lakh / PieceGet Latest Price

            Product Details:

            Minimum Order Quantity1 Piece
            Display TypeDigital
            ConditionNew
            BrandGE Druck
            ModelDPI832
            Operating Temperature14 deg F to 122 deg F (-10 deg C to 50 deg C)
            Storage Temperature-4 deg F to 128 deg F (-20 deg C to 70 deg C)
            Humidity0% to 90% non-condensing, Def Stan 66-31, 8.6 Cat III
            Shock and VibrationBS EN61010:2001, Def Stan 66-31, 8.4 Cat III
            EMCBS EN61326-1:1998 + A2:2001
            SafetyElectrical BS EN61010:2001. CE marked
            DisplayGraphic LCD with backlight. Resolution 99999
            Size and Weight7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 14 oz (400 g)
            Batteries3 AA alkaline, 60 hours mV, V measure, 11 hours mA source (24 V @ 12 mA)

            The DPI 800 Series is a complete range of advanced, robust
            and simple to use hand-held instruments. Highly cost
            effective, these tools are ideal for test/calibration of many
            popular process parameters. Advanced features and
            technical innovations address more applications in less time
            and deliver results you can rely on.

            Features

            • Dual reading capability source mA, mV or V and simultaneously measure mA or capture switch trip values
            • Measure or source mA, mV and V
            • 24V loop supply to power transmitters and loops
            • Large backlit display, menu driven interface
            • HART loop resistor
            • Robust and weatherproof
            • Compact, simple to use, easy to carry
            • Convenient, one-handed operation
            • Secure grip, impact resistant, elastomer protected
            • Plug/play connector for Intelligent Digital Output
            • Sensor (IDOS(TM)) Universal Measurement Modules

            Applications
            • Process instrument test and maintenance
            • Control loop setup and diagnostics
            • Set-up DCS, PLC and signal conditioners
            • Valve positioner adjustment

              Instrumentation Test and Loop Maintenance

              DPI 832 Electrical Loop Calibrator
              Measures or sources mA, mV, V and captures switch trip values. It is the ideal instrument for process technicians to check and maintain transmitters, control loops, DCS, PLC input cards and signal conditioners.

              Programmable Step and Ramp Outputs
              Simplify calibrations and facilitate system diagnostic
              checks. The ramp output provides a stimulus for rate of
              change indicators.

              Adjustable "Nudge" Value
              Provides an incremental output for accurately setting
              valve positioners and testing switches, relays, trips and
              alarms

              Simultaneous Dual Readings
              Simplify transmitter set-up and calibration; for example,
              source mV, V or mA and measure mA

              Advanced Features
              Hold, maximum/minimum/average (with time stamp),
              scaling, tare (offset) and damping filter facilitate system
              checks and troubleshooting

              Two Independent 24 V Power Supplies
              Energize transmitters and control loops

              Automatic Switch Test
              Captures open/closed trip values providing a fast and
              highly accurate "safety system" check

              HART Resistor
              Can be switched into the loop when required for a HART
              digital communicator and avoids the inconvenience of
              carrying a 250 resistor

              IDOS Flexibility

              Intelligent Digital Output Sensor (IDOS)
              Universal Pressure Modules are available from
              10 in H2O to 10,000 psi (25 mbar to 700 bar).

              Total Flexibility
              IDOS modules can be used with any compatible
              instrument; for example, a DPI 832 electrical loop
              calibrator can become a fully featured pressure
              calibrator.

              Ordering Information
              Please state the model number DPI 832 and accessories
              as separate items.
              Supporting Services (order as separate items)
              Each unit is supplied with batteries, test leads, calibration
              certificate and user guide.

              Related Products
              GE is a world leader in the design and manufacture of
              pressure, temperature and electrical field calibrators,
              laboratory/workshop calibration equipment and pressure
              sensors.

              Supporting Services
              Our highly trained staff can support you, no matter
              where you are in the world. We can provide training,
              nationally accredited calibration - both initially and at
              periodic interval

                Request
                Callback


                Additional Information:

                • Item Code: DPI-832
                Yes! I am Interested
                View PDF

                RTD Calibrator

                RTD Calibrator
                • RTD Calibrator
                Get Best Quote
                Approx. Price: Rs 90,000 / PieceGet Latest Price

                Product Details:

                Minimum Order Quantity1 Piece
                Display TypeDigital
                ConditionNew
                Modeldpi812
                Operating Temperature14 deg F to 122 deg F (-10 deg C to 50 deg C)
                Storage Temperature-4 deg F to 158 deg F (-20 deg C to 70 deg C)
                Humidity0% to 90% non-condensing, Def Stan 66-31, 8.6 Cat III
                Shock and VibrationBS EN61010:2001, Def Stan 66-31, 8.4 Cat III
                EMCBS EN61326-1:1998 + A2:2001
                SafetyElectrical BS EN61010:2001, CE marked
                DisplayGraphic LCD with backlight. Resolution 99999
                Size and Weight7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 14 oz (400 g)
                Batteries3 AA alkaline, 70 hours measure, 10 hours 24 mA source (24V @ 12 mA)

                The DPI 811/812 - RTD Calibrator/Loop Calibrator is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on. The DPI 811 RTD Calibrator measures or simulates RTD sensors and is the ideal tool for checking probes, indicators, recorders and controllers.

                Features

                • High performance, low cost
                • Measure and source RTD''s
                • 2, 3 and 4 wire auto detection
                • Temperature test and maintenance
                • Transmitter calibration
                • Loop set-up and diagnostics
                • Switch verification
                • Measure and simulate RTDs
                • Automatic detection of two-, three- and four-wire RTDs
                  highlights faulty probes
                • mA measure, switch test and 24V loop power
                • Large backlit display, menu driven interface
                • HART loop resistor
                • Robust and weatherproof
                • Compact, simple to use, easy to carry
                • Convenient, one-handed operation
                • Secure grip, impact resistant, elastomer protection
                • Plug and play connector for Intelligent Digital Output
                  Sensor (IDOS(TM)) Universal Measurement Modules

                Applications
                • Temperature test and maintenance
                • Transmitter calibration
                • Loop set-up and diagnostics
                • Switch testing

                  Temperature Test and Measurement

                  DPI 811 RTD Calibrator
                  Measures or simulates RTD sensor and is the ideal tool
                  for checking probes, indicators, recorders and controllers

                  Automatic Detection of Two-, Three- and Four-Wires
                  Quickly detects faulty sensors and wiring

                  Pulsed RTD Transmitter Compatibility
                  Simulation mode

                  Advanced Features
                  Step, ramp, maximum/minimum/average hold and
                  facilitate troubleshooting and system checks

                  DPI 811/812 Specifications

                  Log data periodically (1 second to 23 hours 59 minutes
                  59 seconds) or manually by key press. Review data
                  on-screen or upload to a PC via the RS232 interface.
                  No software purchase is necessary as standard
                  Microsoft applications provide data transfer
                  (HyperTerminal) and analysis (Excel). Alternatively, print
                  directly to a compatible serial printer. Real time clock
                  with date. Memory 1000 single or 750 dual reading
                  screens with date and time. Header tag 6 user
                  characters to identify groups of readings. RS232 19.2 k
                  baud, 8 data bits, 1 stop bit, no parity, Xon/Xoff. Data
                  output comma separated ASCII.

                  Ordering Information
                  Please state the model number DPI 811 or DPI 812 and
                  accessories as separate items. Supporting Services (order as separate items) Each unit is supplied with batteries, calibration certificate, user guide and a set of electrical test leads.

                  Related Products
                  GE is a world leader in the design and manufacture of pressure, temperature and electrical field calibrators, laboratory/workshop calibration equipment and pressure sensors.

                  Supporting Services
                  Our highly trained staff can support you, no matter where you are in the world. We can provide training, nationally accredited calibration - both initially and at periodic intervals - extended warranty terms, maintenance and even rental of portable or laboratory calibrators.

                    Request
                    Callback


                    Additional Information:

                    • Item Code: DPI-811-812
                    Yes! I am Interested
                    View PDF
                    X

                    Explore more products



                    Reach Us
                    Sarat Pujari (Proprietor)
                    No. 306, 3rd Floor, Plot No. 6, Anupam Plaza 1 LSC
                    Gazipur, New Delhi- 110096, Delhi, India



                    Call Us

                    Share Us

                    F GT L


                    Send E-mailSend SMS