Portable Calibrator

Product Details:

The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.The DPI 880 Multi-function Calibrator is an ultra compact
and simple to use tool for testing, configuring and calibrating virtually all process parameters. It measures, sources and simulates mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressure, captures switch values and provides 24 V loop power.Simultaneous dual readings
Reads both input and output parameters simplifying calibrations and system diagnostics. Calibration values are captured on one screen and adjustments are seen in real time, for example, when making zero and span adjustments.
Programmable step and ramp outputs
Quickly step through calibrations with the %Step output or make zero and full scale adjustments using Span Check. The Ramp output is ideal for delicate analogue meters, rate of change indicators and checking valve travel and slew rates.

Adjustable nudge output
Provides small incremental output changes for accurately setting valve positioners, switches, trips, and alarms.


Automatic switch test
Captures open/closed trip values providing a fast and highly accurate "safety system" check.

HART resistor
Can be switched into the loop when required for a HART digital communicator avoiding the inconvenience of carrying a 250 Ω resistor.
24V loop power supply
Energises transmitters and control loops.
Temperature:Measures or simulates RTD or thermocouple sensors and is the ideal tool for checking probes, transmitters, process loops, indicators and controllers. Use with a temperature probe to provide a versatile thermometer. Unique thermocouple cold junction compensation Virtually eliminates errors caused by changing environmental conditions on test instruments used
outside.
Automatic detection of 2, 3 and 4 wire RTDs
Quickly detect damaged sensors and faulty wiring that
could otherwise be missed or cause system inaccuracy.
Thermometer with wide probe compatibility
Compatibility with 8 RTDs and 12 thermocouples allows probe selection for any thermometer application, e.g. general purpose, high temperature, hygienic and aggressive media.

Frequency:Measures or sources Hz, kHz, CPM and CPH providing a highly accurate calibration standard and versatile test tool for process technicians and electronic engineers. Dedicated features facilitate test and maintenance of electronic circuits, frequency/flow meters, batch counters, tachometers, and motion pickups.

Automatic trigger
Detects the best value regardless of waveform or amplitude.
Pressure:Intelligent Digital Output Sensor (IDOS) Pressure Modules
are available from 10 in H2O to 10,000 psi

Features:

• Sources and reads mA, mV, V, ohms, frequency and pulses
• Simulates and reads 8 RTDs and 12 thermocouples
• 32 pressure modules from 10 in H20 to 10,000 psi (25 mbar to 700 bar)
• Simultaneous dual reading capability
• Automatic switch test and pressure leak test
• 1000 point data storage with real time clock
• 24 V loop power supply
• HART® loop resistor
• Large backlit display
• Robust and weatherproof
• Compact, simple to use, easy to carry
• Convenient one-handed operation
• Plug/play connector for IDOS Universal Pressure
  Modules

Applications:

• Test and maintenance
• Transmitter calibration
• Loop set-up and diagnostics
• Switch, trip and alarm verification

Additional Information:

• Item Code: DPI-880

Product Details:

The Druck DPI 620 Genii Series - Advanced Modular Calibrator and
HART/Fieldbus Communicator comprises four system components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments. These system components are:

• DPI620G - Multi-function calibrator, HART/Fieldbus Communicator
• PM620 - Interchangeable pressure modules
• MC620G - Pressure module carrier
• PV62XG - Pressure generating stations

This ultra-compact electrical, frequency and temperature calibrator with full HART communicator and optional Foundation Fieldbus communicator provides simultaneous measurement and source capabilities for the setup, testing and calibration of most types of process instruments including transmitters, transducers, gauges/indicators, switches, proximity detectors, counters, RTDs, thermocouples and valve positioners.

Features:

• Multi-function capabilities: electrical, frequency, temperature and pressure
• Optional HART and Foundation Fieldbus
• Communicators
• ATEX and IECEx approved for hazardous area use
• Modular re-rangeable and expandable concept
• Individual components can be used as stand-alone instruments
• Allows significant inventory reductions
• Simplifies training and improves operator safety
• Reduces cost of ownership
• High resolution touch display and UI (user interface) supporting gestures and swipes for a flatter menu structure and greater ease of use
• HART and Foundation Fieldbus digital communication with complete device description libraries, internal modems and free of charge upgrades
• ATEX and IECEx approved system for use in zone 1 and 2 classified hazardous areas
• UI DASHBOARD to quickly launch applications such as CALIBRATOR, HART and Foundation Fieldbus
• TASK menu allows single touch configuration for common devices such as pressure and temperature transmitters, transducers, switches,
  and valve positioners. Most used and user configured tasks can be added to FAVOURITES.
• All first generation DPI620 and the new Genii system components are fully interchangeable eg pressure stations, pressure modules and all accessories

Dashboard applications (model dependant):
Calibrator

• One touch selection of common tasks, e.g. P to I for a pressure transmitter
• Highest accuracy for measuring, sourcing and simulating electrical, frequency, temperature and pressure
• Simulate device inputs and measure outputs simultaneously
• Calculates errors between inputs/outputs
• Pressure system generates 100 bar/1,500 psi pneumatic and 1,000 bar/15,000 psi hydraulic pressures.
• Interchangeable pressure modules from 25 mbar/10 inH2O to 1,000 bar/15,000 psi

Documenting:

• Data log up to six channels simultaneously
• Automate calibration procedures and Document As Found and As Left results
• Store a complete plant database of procedures and results
• View standard office documents, including images, text files, spreadsheets and presentations
• Compatible with calibration management software

HART Communicator:

• Measure and source analogue variables without secondary calibration equipment
• No power during shutdown? Genii provides loop power 24 V or 28 V
• Need a 250 ohm resistor? Just select from the menu
• It’s easy to upgrade Genii with free of charge software and latest DD library
• View, change, and store device configurations
• Work off-line to create and change configurations
• Transfer device configurations to your PC

Foundation Fieldbus communicator - optional:

• Fully featured fieldbus communicator for device configuration and calibration

Additional Information:

• Item Code: DPI620GeniiIS

Product Details:

• One touch selection of common tasks, e.g. P to I for a pressure transmitter
• Highest accuracy for measuring, sourcing and simulating electrical, frequency, temperature and pressure
• Simulate device inputs and measure outputs simultaneously
• Calculates errors between inputs/outputs
• Pressure system generates 100 bar/1,500 psi pneumatic and 1,000 bar/15,000 psi hydraulic pressures.
• Interchangeable pressure modules from 25 mbar/10 inH2 O to 1,000 bar/15,000 psi 
• Measure and source analogue variables without secondary calibration equipment
• No power during shutdown? Genii provides loop power 24 V or 28 V (Genii-IS series 15V)
• Need a 250 ohm resistor? Just select from the menu
• It’s easy to upgrade Genii with free of charge software and latest DD library
• View, change, clone and store device configurations
• Work off-line to create and change configurations
• Transfer device configurations to your PC

Additional Information:

• Delivery Time: ex stock

Product Details:

A flexible modular system:The Druck DPI 620 Genii Series - Advanced Modular Calibrator and
HART/Fieldbus Communicator comprises four system components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments. These system components are:

• DPI620G - Multi-function calibrator, HART/Fieldbus Communicator
• PM620 - Interchangeable pressure modules
• MC620G - Pressure module carrier
• PV62XG - Pressure generating stations

Features:

• Multi-function capabilities: electrical, frequency, temperature and pressure
• Optional HART and Foundation Fieldbus Communicators
• ATEX and IECEx approved for hazardous area use
• Modular re-rangeable and expandable concept
• Individual components can be used as stand-alone instruments
• Allows significant inventory reductions
• Simplifies training and improves operator safety
• Reduces cost of ownership
• High resolution touch display and UI (user interface) supporting gestures and swipes for a flatter menu structure and greater ease of use
• HART and Foundation Fieldbus digital communication with complete device description libraries, internal modems and free of charge upgrades
• ATEX and IECEx approved system for use in zone 1 and 2 classified hazardous areas
• UI DASHBOARD to quickly launch applications such as CALIBRATOR, HART and Foundation Fieldbus
• TASK menu allows single touch configuration for common devices such as pressure and temperature transmitters, transducers, switches,
  and valve positioners. Most used and user configured tasks can be added to FAVOURITES.
• All first generation DPI620 and the new Genii system components are fully interchangeable eg pressure stations, pressure modules and
  all accessories

Dashboard applications (model dependant):
Calibrator

• One touch selection of common tasks, e.g. P to I for a pressure transmitter
• Highest accuracy for measuring, sourcing and simulating electrical, frequency, temperature and pressure
• Simulate device inputs and measure outputs simultaneously
• Calculates errors between inputs/outputs
• Pressure system generates 100 bar/1,500 psi pneumatic and 1,000 bar/15,000 psi hydraulic pressures.
• Interchangeable pressure modules from 25 mbar/10 inH2O to 1,000 bar/15,000 psi

Documenting:

• Data log up to six channels simultaneously
• Automate calibration procedures and Document As Found and As Left results
• Store a complete plant database of procedures and results
• View standard office documents, including images, text files, spreadsheets and presentations
• Compatible with calibration management software

HART Communicator:

• Measure and source analogue variables without secondary calibration equipment
• No power during shutdown? Genii provides loop power 24 V or 28 V
• Need a 250 ohm resistor? Just select from the menu
• It’s easy to upgrade Genii with free of charge software and latest DD library
• View, change, and store device configurations
• Work off-line to create and change configurations
• Transfer device configurations to your PC

Foundation Fieldbus communicator - optional:

• Fully featured fieldbus communicator for device configuration and calibration
• Complete device description library
• It’s easy to upgrade Genii with free of charge software and latest DD library